Riser Block - EVB093
For use with Ergo Stand EVB012 or Slim Stand EVB014
Fitting:
- Carefully lay the Ergo stand on to its side as shown.
- Making sure the column is supported, using the supplied 4mm HEX key, remove the three bolts ❶ that retain the column to the stand.
- Discard the removed bolts.
- Orientate the riser block so that the locator pin holes ❷ are upwards.
- Using the three bolts supplied with the riser block reassemble the base, riser block and column as shown, tightening fully so that the column is securely fitted to the base casting.