SX Stand Interface - EVB096
Fitting the EVO Cam interface plate
Remove end cap screw ❶
Whilst supporting the focus module ❷, loosen the locking screw ❸ and remove the focus module from the boom stand ❹.
Rotate the focus knob ❺ clockwise until the top two retaining screws can be removed.
Support the head bracket ❻ and rotate the focus knob anti-clockwise until the bottom two retaining screws can be unscrewed and the head bracket removed.
Locate the interface plate ❼ with the two bottom retaining screws.
Ensure the interface plate is positioned with the grub screw ❽ on the
right, when looking at the interface.
Rotate the focus knob clockwise until the top two retaining screws can
be used to secure the interface plate.
Re-attach the focus module to the boom stand.