Pilot Stage + Adaptor Kit - EVS121
This adapter kit can be used to mount a Pilot Stage on a Lynx EVO ERGO stand.
Fitting:
Fitting the adapter kit:
- Remove the cover plate ❶ from the base of the ERGO stand.
- Place the four spacers ❷ supplied with the adapter kit over the threaded holes on the stand as shown.
- Add the circular adapter plate ❸ and secure it using the four 16mm screws ❹ supplied with the adapter kit.
Note the orientation of the holes in the adapter plate.
Fitting the Pilot Stage:
Do not use the screws and pillars included with the Pilot Stage kit. Use the four screws included in the adapter kit.
Place the stage 1 on the adapter plate 2 ensuring the location holes are suitably aligned as shown.
Use the four screws 3 to secure the Pilot Stage to the adapter plate.
Fitting the stage glass:
Place the stage glass ❶ on to the top of the stage so it is flush with the top surface of the Pilot Stage ❷.