Sub-Stage Illuminator - ECI304
Fitting:
See below or also follow video here.
- Remove the stage cover plate ❶ and thread the lead ❷ through the stand base.
-
Locate the illuminator ❸ into the stage base and secure it with the two screws ❹.
- Carefully lay the Ergo stand on to its side and thread the lead through the base as shown. Push the cable grommet ❺ into the stand.
- Turn the Ergo stand upright and replace the illuminator diffuser ❻, surround ❼ and glass ❽.
If assembling the optional glare reducing filter, this needs to be placed between the diffuser and the surround.